Configuring Connection Settings Guide

	Introduction
	Configuring wireless LAN WLAN wizard
	Creating Internet connections Creating an Internet access point for packet data (GPRS) Creating an Internet access point for WLAN Modifying EAP settings Selecting an Internet access point
	Configuring text messages (SMS) Configuring text message center settings Configuring text message settings
	Configuring multimedia messages (MMS)
	Configuring voice mailbox (network service)

WLAN wizard

The WLAN wizard helps you to connect to a wireless LAN.

The WLAN wizard shows the status of your wireless LAN connections and network searches in the active standby mode. To view the available options, scroll to the row showing the status, and press the scroll key. Depending on the status, you can start the web browser using a wireless LAN connection, disconnect from a wireless LAN, search for wireless LANs, or set network scanning on or off.

If wireless LAN scanning is off and you are not connected to any wireless LAN, WLAN scanning off is displayed in the active standby mode. To set scanning on and search for available wireless LANs, scroll to the status, and press the scroll key.

To start a search for available wireless LANs, scroll to a status, press the scroll key, and select Search for WLAN. To set wireless LAN scanning off, scroll to a status, press the scroll key, and select Switch WLAN scan off.

When you select Start Web browsing, the WLAN wizard automatically creates an internet access point (IAP) for the selected wireless LAN. The IAP can also be used with other applications requiring wireless LAN connection.

If you select a secured wireless LAN network, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct hidden service set identifier (SSID).

You can also start the WLAN wizard separately to get more information on wireless LANs within range.
Select Menu > Connect. > WLAN wiz.. Found networks are displayed.
Scroll to the desired network, select Options, and from the following:

Start Web browsing or Cont. Web browsing — Start or continue browsing the web using the IAP of the wireless LAN.
Disconnect WLAN — Disconnect the active connection to the wireless LAN.
Refresh — Update the list of available wireless LANs.
Details — View the details of the wireless LAN.
Define access point — Create an internet access point without starting the web browser.

Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorized access to your data.

WLAN scanning can be disabled from Active standby by deselecting Wireless LAN from Menu > Tools > Settings > General > Personalisation > Standby mode > Active standby plug-ins

When you select Start Web browsing, the WLAN wizard automatically creates an internet access point (IAP) for the selected wireless LAN. The IAP can also be used with other applications requiring wireless LAN connection.

If you select a secured wireless LAN network, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct hidden service set identifier (SSID).

You can also start the WLAN wizard separately to get more information on wireless LANs within range. Select Menu > Connect. > WLAN wiz.. Found networks are displayed.

Scroll to the desired network, select Options, and from the following:

Start Web browsing or Cont. Web browsing - Start or continue browsing the web using the IAP of the wireless LAN.
Disconnect WLAN - Disconnect the active connection to the wireless LAN.
Refresh - Update the list of available wireless LANs.
Details - View the details of the wireless LAN.
Define access point - Create an internet access point without starting the web browser
Enable one of the available data encryption methods to increase the security of your wireless LAN connection.