|
After you have installed the Nokia Modem Options,
you need to make the settings for your Nokia 8910i using
the Nokia Modem Options.
To do this:
- Start the Nokia Modem Options by going to My
Computer > Control Panel > Nokia Modem
Options. The Nokia Modem Options user interface
should open.
- Select the appropriate phone and connection method
(Nokia 8910i IrDA / Bluetooth) from
the Installed Nokia Modems list. (Only phones that
are installed and that support GPRS and HSCSD are
shown). If your phone is not visible, click the Refresh
button. If you installed both the Bluetooth and infrared
connection methods, you must configure the Nokia Modem
option settings for both connection methods.
- Next, under Data connection, configure the
GSM data connection settings, if you are going to
use GSM data.
- Under Speed, select 9.6 KBits/s
if the service provider you are using does not
support high-speed data (HSCSD) or if you have
problems making a data call. Use speeds of 14.4
KBits/s or higher only if you are sure that the
service provider you are using supports high-speed
data (HSCSD). If in doubt, check with your service
provider.
- Select Connection method. Check whether
your service provider supports Modem, ISDN V.110
or ISDN V.120.
- If you are going to use a GPRS connection, enter
the GPRS Access Point name. You should receive
this information from your service provider.
- When you are ready, click OK.
- If you installed both connection methods (Bluetooth
and Infrared) you should now return to step 3 of the
instructions and configure the settings for the second
connection method.
|
|
 |
|
|
|
