 |
|
|
  |
|
 You
may need to... |
|
|
 |
…
check the availability of WAP services, pricing
and tariffs with your network operator and/or the
service provider whose service you wish to use.
Service providers will also give you instructions
on how to use their services. |
|
 |
|
|
To
manually set up your phone for WAP connectivity, follow
these steps:
- Press Menu, and select Services, and
Settings.
- Select Active service settings. You need
to activate the set where you want to save the service
settings. A set is a collection of settings needed
for making a connection to a WAP service.
- Scroll to the set you would like to activate and
press Activate.
- Select Edit active service settings. Select
each of the following service settings one by one
and key in all the required settings.
- Settings' name - Key in the new name for
the connection set and press OK.
- Homepage - Key in the homepage address
of the WAP service that you want to use, press
 for
a dot, and press OK.
- Session mode - Select Permanent
or Temporary.
- Connection security - Select On
or Off. When the connection security setting
is On, the phone tries to use a secure connection
with the WAP service. If a secure connection is
not available, the connection will not be made.
If you wish to connect anyway with a non-secure
connection, you must set the connection security
setting to Off.
- Data bearer - Select GSM data or
GPRS. For detailed instructions, select "GSM
as the data bearer" or "GPRS as the data bearer"
from the menu on the left. For pricing, connection
speed and other information, contact your network
operator or service provider.
|
|
|
|
Show
me... 