GLOSSARY | SITE INDEX
Intro Getting Started Using Your Phone Connectivity Tips & Hints FAQ
  PC Suite     Modem Setup  
Connections
Nokia PC Suite 5.03 no longer responds.

If you are using an infrared connection, reactivate the infrared port of the phone and then restart Nokia PC Suite 5.03.

Nokia PC Suite 5.03 does not respond during a data call.

It is not possible to use Nokia PC Suite 5.03 during a data call. End the data call and restart Nokia PC Suite 5.03.

I disconnected and then reconnected my phone, without waiting for Nokia PC Suite 5.03 to recognize that the phone had been disconnected. Now Nokia PC Suite 5.03 does not respond.

Before reconnecting the phone, you should wait until Nokia PC Suite 5.03 recognizes that you have disconnected the phone. This process may take a few seconds. The phone icon displayed on the status bar indicates the status of the phone connection. In Nokia PC Sync, the Nokia PC Sync tray icon appears yellow and white when the phone is disconnected. If you have reconnected your phone too early and experience problems, switch off your phone, then switch it on again and restart Nokia PC Suite 5.03.

How can I get my Nokia 5100 to work in the Nokia Connection Manager through the DKU-5 cable?

Presuming that you have a Nokia 5100 phone, a DKU-5 cable, Windows OS, the correct drivers for the DKU-5 cable, and Nokia PC Suite 5.03:
    1. Install the drivers to your computer
    2. Plug in the cable. Windows should recognize the cable and find the drivers for it.
    3. Select yes to the Digital signature question and the drivers are installed OK.
    4. Start Nokia Connection Manager (if not already open).
    5. Turn cable button off (the leftmost button;, it has a white background when turned off).
    6. Turn the phone off and plug the cable into the phone. Restart the phone.
    7. Turn the cable button on.
    8. The pPhone should be shown in the list.
I cannot find the Connection Manager.

If you have installed only Modem Options, the Connection Manager is not installed. When you install any other application, the Connection Manager will always be installed.

How can I check the IrDA connection in Windows 98?

Before using Nokia PC Suite 5.03 via IrDA, you can test the functionality of the IrDA port in the following way:

1. Open the Microsoft Infrared Monitor.
2. Check that Infrared communication is enabled in your system.
Make sure that the Infrared Monitor has found your Nokia 5100 phone.
© Nokia 2002. Read our legal notice and privacy policy